R44 HAIL PROTECTION COVERS
The AVIOTECNICA Engine and tail boom cover is made from Silver Polyester material and is lined with a soft and smooth microfiber fleece backing. 6mm compacted poly foam material is inserted between the double material layers in order to absorb the impact of the hail stones on the engine and tail boom surrounds of the aircraft.-
The cover’s outer material is 210D grade polyester. It has been treated for water resistance, it is UV protected as well as with anti-static build up.
The inner 6mm thick material and the reflective silver outer material will reduce the overall interior temperature of the aircraft on even the hottest days.
The unique air breathers fitted to the outer of the cover will also allow ventilation of hot air normally trapped under the cover and will not allow rain in but in unless in extreme weather conditions. In cold weather the air breathers provide ventilation to allow moisture to escape from between the cover and the cockpit surface. If needed in icy conditions, the air scoops can be sealed by the Velcro strips sown in to the scoops.
Special Hi-Visibility fluorescent strips are fitted to the cover so that the aircraft can be seen at night time.
The fleece backing of the cover inner lining is of a soft microfiber material to prevent scratching to the aircraft painted surfaces.
Security straps with quick locks clips are attached to the cover to ensure a “STAY-PUT” fit.
It is always best practice to apply this cover to a clean, dry and cool surface as this fabric will pick up any dirt left on your aircraft.
*Aviotecnica cannot guarantee that in extreme cases of hailstones the special foam material will withstand the forces of unusually heavy hail stones but it will minimize their impact and therefor minimize damage”
Description: R44 Engine & Tail-Boom Hail Protection Cover
Assembly Materials: Bright Silver, Foam Padding and safety reflector to create high visibility.
Part Number: CRAFT 4
Aircraft Eligibility: R44
Design Approval: N/A
Complies with: N/A
Qty: 1
OUTDOOR PROTECTION COVERS
The cover is made of Looped Polyester and TPU fabric, it is lined with a soft and smooth microfiber fleece backing.
The cover outer material is waterproof , UV protected and with anti- static build up.
The cover will reduce the cabin interior temperature greatly even in the hottest of days.
The unique air breathers fitted to the outside of the cover will also allow ventilation of hot air normally trapped under the cover.
In cold weather the air breathers provide ventilation to allow moisture to escape from between the cover and the cockpit surface. If it need be in icy conditions, the air scoops can be sealed by the Velcro strips sawn in to the scoops.
Special Hi-Visibility fluorescent striping are fitted to the cover so that the aircraft can be seen at night time
The fleece backing of the cover’s inner lining is of a soft microfiber to prevent scratching to the aircraft Perspex and painted surfaces.
The hem of the cover has an elasticised cord which can be tightened to a snug fit to help prevent abrasive chafing of the windshield. Security straps with quick locks clips are attached to the cover to ensure a more secure “STAY-PUT” fit.
The Aviotecnica Cockpit Protection Cover will minimize damage to the upholstery caused by excessive heat and can eliminate problems caused by leaking door and window seals.
It is always best practice to apply this cover to a clean, dry and cool cockpit as this fabric will pick up any dirt left on your aircraft.
Description: R44 -R46 Cockpit Outdoor Protection Cover
Assembly Materials: Brown, Waterproof material and safety reflector to create high visibility.
Part Number: CRAFT 2
Aircraft Eligibility: R44 - r46
Design Approval: N/A
Complies with: N/A
Qty: 1
INDOOR PROTECTION COVER
The cover is made from a Durable Acrylic 4 way stretchable fabric and is lined with a soft and smooth microfiber fleece backing.
The material is not abrasive it is UV protected and with anti-static build up.
The backing of the cover inner lining is a soft microfiber to prevent scratching to the aircraft Perspex and painted surfaces.
The cover will keep the windscreen and window surfaces clean..
The hem of the cover has an elasticized cord which can be tightened to a snug fit to help prevent abrasions and chafing of the windshield. Security straps with quick locks clips are attached to the cover to ensure a “STAY-PUT” fit making it extremely dust-proof.*
*In windy conditions dust might flow through from the bottom of the cover or the air breather but otherwise is exceptionally dust-proof.
It is always best practice to apply this cover to a clean, dry and cool cockpit as this fabric will pick up any dirt left on your aircraft.
Description: R44 - R66 Cockpit Indoor Protection Cover
Assembly Materials: Grey soft lined material, safety reflector to create high visibility.
Part Number: CRAFT 3
Aircraft Eligibility: R44-R66
Design Approval: N/A
Complies with: N/A
Qty: 1
MAIN ROTOR BLADE COVERS
Suit size blades up to 31cm width. Length of product 37cm.
Tie-downs straps are fully adjustable in order to secure the blades to the desired position.
The Main blade Tie Down is made from 600D grade polyester fabric and it is lined with non-abrasive backing material.
Hi-Visibility fluorescent stripes are sown to the cover and to the tie down belt for added visibility of the aircraft.
The Main blade cover fits over the end of blade tip with the security belt attached.
The belt can be fully secured and adjusted the blade size to withstand extreme weather conditions.
The TIE DOWN belt attached the cover can be fully adjusted in order to hold the main blade to the correct position.
The R44-R66 aircraft have an appropriate slot on the top of the headlights to secure the tie down. The rear of the main blade cover can be attached to the tail boom with supplied tie down strap.
Suit size blades 5.2mt long x 31w cm.
The cover is made from Silver Polyester material and it is lined with a non-abrasive fleece backing. It protects against salt build up in coastal areas reducing the requirement for protective fluids such as WD40 to the rotor blades.
Compacted 6mm poly foam material is inserted between the double material layers in order to absorb the impact of hail stones on the blade surfaces.
The cover outer material is 210D grade polyester; treated for water resistance it is UV protected and with anti-static build up
A series of breather outlets have been fitted to the bottom side of the cover for air circulation and drainage.
Hi -Visibility florescent stripes are sawn onto the cover and to the tie down belt for added visibility of the aircraft.
A fully adjustable tie down belt is attached to the cover to secure the blade of the aircraft in the preferred position.
The TIE DOWN belt attached the cover can be fully adjusted in order to hold the main blade to the correct position.
The R44-R66 aircrafts have an appropriate slot on the top of the headlights to secure the tie down. The rear of the main blade cover can be attached to the tail boom with supplied tie down strap.
It is easy to slip on with one person.
To secure the hail cover to the blade a series of belts with Velcro have been attached to the cover so that it can be securely tied to the main blade to withstand extreme weather.
The rear blade cover can be fitted to the rear blade as easily as the forward blade and can be secured to the tail boom with supplied tie on strap.
Aerotecnica cannot guarantee that in extreme cases the special EPE foam material will withstand the extreme forces of unusually heavy hail stones but it will minimize their impact and therefor minimize damage”
Suit blade sizes up to 39cm wide . Length of product 37cm
Suit AGUSTA AW109; BELL JET RANGER, LONG JET RANGER ETC.
The AVIOTECNICA MAINBLADE TIEDOWN cover is made from 600D grade Oxford polyester fabric and it is lined with non-abrasive backing material.
Hi -Visibility florescent stripes are sawn onto the cover and to the tie down belt for added visibility of the aircraft.
The Main rotor blade tie down fits over the end of blade tip with a security belt attached.
The belt can be fully secured to the blade to withstand extreme weather by firmly tightening of the belts.
The TIE DOWN belt is fully adjustable in order to hold the blade in the correct position and can be tied to any suitable attachment point on the aircraft
The Main rotor blade tie down will suit any main rotor blade within dimensions specified above. Velcro straps adjusts tightness on smaller blades.
To suit blades up to 39cm width x5.2mt long. Includes Tie Down Holder.
Suit AGUSTA AW109, BELL JET RANGER, LONG JET RANGER ETC.
The AVIOTECNICA blade Hail protection cover is made from Silver Polyester material and it is lined with a non-abrasive fleece backing. It protects against salt build up in coastal areas reducing the requirement for protective fluids such as WD40 to the rotor blades.
Compacted 6mm poly foam material is inserted between the double material layers in order to absorb the impact of hail stones on the blade surfaces.
The cover outer material is 210D grade polyester is treated for water resistance, anti-static build up and UV protected.
A series of breather outlets have been fitted to the bottom side of the cover for air circulation and drainage.
Hi-Visibility fluorescent stripes are sown to the cover and to the tie down belt for added visibility.
The TIE DOWN strap is fully adjustable in order to hold the blade in the correct position and it can be tied to the aircraft by way of any suitable attachment point on the aircraft.
To secure the Hail cover to the blade a series of belts with Velcro have been sawn to the cover so that it can be securely tied to the blade to withstand extreme weather.
The blade cover can be fitted to the rear the same way as the front blade and can be secured to the tail boom with the supplied tie down strap.
The Main rotor blade tie down will suit any main rotor blade within dimensions specified above. Velcro adjustable straps will tighten on smaller blades.
*Aerotecnica cannot guarantee that in extreme cases the special EPE foam material will withstand the extreme forces of unusually heavy hail stones but it will minimize their impact and therefor minimize damage”
The AVIOTECNICA Cockpit Hail Cover is made from Silver Polyester material and is lined with a soft and smooth microfiber fleece backing. 6mm compacted poly foam material is inserted between the double material layers in order to absorb the impact of the hail stones on the cabin and cabin surrounds of the aircraft.
It covers the main cockpit, front and rear doors. For complete airframe protection combine this cover with the engine, fan assembly and tail boom cover. PART NO Craft4
The cover outer material is 210D grade polyester treated coating for water resistance, UV protected and anti-static build up.
The inner 6mm thick and the reflective silver outer material will reduce the interior temperature of the aircraft greatly even in the hottest days.
The unique air breathers fitted to the outer layer of the cover will also allow ventilation of hot air normally trapped under the cover and will not allow rain in. However under extreme weather conditions water may penetrate. In cold weather the air breathers provide ventilation to allow moisture to escape from between the cover and the cockpit surface. If required in icy conditions, the air scoops can be sealed by the Velcro strips sawn in to the scoops.
Special Hi-Visibility fluorescent striping is fitted to the outer of the cover so that the aircraft can be seen at night time.
The fleece backing of the cover inner lining is made of a soft microfiber material to prevent scratching to the aircraft Perspex and painted surfaces.
The hem of the cover has an elasticised cord which can be tightened to a snug fit to help prevent abrasions or chafing of the windshield. Security straps with quick locks clips are attached to the cover to ensure a “STAY-PUT” fit.
The Aviotecnica hail cover will also minimize damage to the upholstery caused by excessive heat and can overcome problems caused by leaking door and window seals.
It is always best practice to apply this cover to a clean, dry and cool cockpit as this fabric will pick up any dirt left on your aircraft.
*Aviotecnica cannot guarantee that in extreme cases of hailstones the special EPE 6mm foam material will withstand the forces of unusually heavy hail stones but it will minimize their impact and therefore minimize damage”
Description: R44 Cockpit Hail Protection Cover
Assembly Materials: Bright Silver, Foam Padding and safety reflector to create high visibility.
Part Number: CRAFT 1
Aircraft Eligibility: R44
Design Approval: N/A
Complies with: N/A
Qty: 1